Services · Repairs
Fence, Gate & Operator Repairs
Inspection, troubleshooting and repair for existing fencing, gates, operators, access components and the electrical hardware behind them. Project details are reviewed first so the right repair is identified before work begins.
What It Covers
Existing systems inspected before anything is replaced
A gate that stops mid-travel can be the operator, the track, a safety device or the wiring feeding it. Because we install fencing, automation and access hardware, the whole system gets checked instead of one component being swapped on a guess.
Every repair scope depends on what the inspection finds. We do not quote a fix, a timeline or a parts list before the equipment and site conditions have been reviewed.
CSLB #1146070 · B · C-13 · C61/D28 · Serving Southern California.
Common symptoms we're called out for
- Gate opens partway, reverses or stops mid-travel
- Operator hums, clicks or does nothing when triggered
- Gate drags, binds or comes off track
- Keypad, card reader or intercom no longer grants entry
- Safety sensors keep holding the gate open
- Vehicle loop no longer detects at the exit
- Fence section damaged by impact, weather or age
- Maglock or electric strike will not hold or release
Capabilities
What We Service
Repairs cover the mechanical, electrical and access sides of an existing fence or gate system.
- 01
Gate Operators
Troubleshooting for slide, swing, overhead and in-ground operators that stop, stall, run intermittently or no longer respond to controls.
- 02
Gate Hardware
Rollers, tracks, hinges, latches, stops and frame connections that have worn, shifted or been damaged.
- 03
Fence Sections
Damaged or leaning panels, posts, mesh and pickets on wrought iron, ornamental, chain link, security mesh, vinyl and wood fencing.
- 04
Access Components
Keypads, intercoms, readers, controllers, maglocks and electric strikes that no longer read, latch or release as expected.
- 05
Safety & Detection Devices
Photo-safety eye sensors and vehicle loop sensors that misread, false-trigger or have lost alignment.
- 06
Related Electrical
Operator power, conduit runs, terminations and low-voltage device wiring connected to the gate or access system.
Gate or fence not working the way it should?
Send the property details and what the equipment is doing, and we'll arrange a review.
How We Approach Your Project
Diagnose first, then repair
- 01
Tell us what's happening
Describe the equipment and what it is doing — the details narrow down what to check first.
- 02
On-site inspection
The gate, operator, hardware, devices and wiring are checked as a system, not in isolation.
- 03
Findings reviewed with you
We explain what was found and what the repair involves before work moves forward.
- 04
Repair or replace
Worn or damaged components are repaired or replaced based on what the inspection showed.
- 05
Function check
The gate cycle, safety devices and access hardware are checked again after the work.
Start a Project
Need an Existing Fence or Gate System Repaired?
Describe the equipment and the issue in the form and we'll follow up to review the repair.
- Call
- (714) 510-2878
- Licensed
- CSLB #1146070 · B · C-13 · C61/D28