Services · Installation
Fence, Gate & Access Installation
Installation of fence systems, gates, automation and access-control equipment across Southern California — planned around the property, the opening and how the entry is used every day.
What It Covers
One installer for the fence, the gate and the equipment on it
Because the fencing, the gate, the operator and the access device are installed by the same team, the finished entry is set up as a single system instead of separate trades meeting at the opening.
- CSLB #1146070
- Classifications B · C-13 · C61/D28
Fence systems
Post layout and setting, panel and mesh runs, terminations at walls, buildings and existing structures.
Gates
Swing and slide gate leaves, tracks, rollers, hinges, latches and stops set for the opening.
Gate automation
Mounting and installation of slide, swing, overhead, in-ground operators and parking barriers.
Access-control equipment
Keypads, intercoms, readers, controllers, maglocks and electric strikes installed at the entry.
Safety and detection devices
Photo-safety eye sensors and vehicle loop sensors installed as part of the automated opening.
Related electrical
Operator power, conduit runs and device wiring associated with the installed system.
Applications
Properties We Install On
Installation scopes differ by property type — the equipment, the gate configuration and the access method all follow how the site is used.
- 01
Residential Properties
Perimeter fencing, driveway gates, pedestrian gates and residential operators installed to suit the lot, the slope and the way the property is used.
- 02
Commercial Sites
Entry gates, storefront and yard perimeters, and access hardware coordinated with tenant, staff and visitor traffic.
- 03
Industrial Facilities
Heavier gate configurations, yard perimeter runs, truck-gate openings and operators sized for the duty cycle of the site.
- 04
Apartment Complexes
Resident and guest entry, intercom and credential hardware, and vehicle gates installed with the traffic flow of the community in mind.
- 05
School Districts
Campus perimeter fencing, controlled entry points and access hardware installed around existing site conditions.
- 06
Complete Systems
Fence line, gate, operator, sensors and access devices installed as one system so the finished entry works together.
Planning a new fence, gate or automated entry?
Share the property type and the opening you need covered and we'll review the installation scope with you.
How We Approach Your Project
Measured on site, then installed to fit
- 01
Site walk
We review the property, the opening, existing conditions and how the entry needs to be used.
- 02
Measurements & layout
Opening dimensions, grade, post spacing and equipment locations are confirmed on site.
- 03
System selection
Fence type, gate configuration, operator sizing and access method are matched to the property.
- 04
Installation
Posts, fencing, gates, operators and devices are installed, then wired and mounted.
- 05
Setup & walkthrough
Compatible operators and devices are configured, then we walk the finished system with you.
Scope, materials and scheduling are confirmed after the property is reviewed — every opening and site condition is different, so the installation plan is built from what is actually there.
Start a Project
Ready to Install a New Fence, Gate or Access System?
Tell us about the property and the opening, and we'll follow up to review the installation scope.
- Call
- (714) 510-2878
- Licensed
- CSLB #1146070 · B · C-13 · C61/D28